Caspian Engineering Company

Acoustic and Seismoacoustic Profile Recorders with Hammers of “Sparker” and “Bumer” Types

Testing of the seismic streamer and digital modules for leakage, voltage and current.The Seismoacoustic source of "Bumer" type is designed for works with application of high power and has an additional benefit — change of frequency of a signal due to change of energy of a source of CSP-D. It allows to achieve increase of width of an impulse of a signal not available earlier. The increase of width of an impulse provides more big penetration with quality preservation of a single impulse.

The sparker source Sparker Squid 2000 is designed for high-allowing analog researches with a low electric power and high penetration of a signal. The source is mounted on twin-hulled ship, which is steady against towage; it is also perhaps easy to regulate deepening of a source for the best form of an impulse.

Source excitation «Boomer» - Bandwidth of emission level of 0.5 to 500 Hz - 2 kHz; - Electrical energy - 1 kJ. Source excitation «Sparker - Stored energy - 2.5 kJ; - Operating frequency range - 100-800 Hz; - The number of electrodes - 120 pieces; - Capacitance - 50 uF; - Operating voltage - 7kV

The module for the collection of high-resolution acoustic data is 24-bit dual-channel system for the collection of acoustic data, with the possibility of simultaneous operation of two independent and recording systems

The system scales to multi-channel option module is connected to the computer via the USB interface. The system works with software Geo-Suite Acquisition for data logging, with the ability to export data in the software Geo- Suite Allworks for processing and interpretation of data; Ability to connect to Printrex thermal printer for printing data during shooting;

Easy and reliable.

48-channel seismic gel-filled spit for ultrahigh resolution seismic

Digital telemetry system FTA-48-6,25 APB Analog : - The number of channels 48; - Base groups 12.5 m; - Step channels of 6.25 m; -poliuretan bight, liquid paraffin (gel); - Seismic winch.

General specifications:

Small diameter (41 mm), small bending radius <40 cm;
Very durable hose made of DELRIN material and two 5 mm Kevlar wires with a tensile strength of> 3000 kg;
Winch to spit in stainless steel for easy and secure deployment;
The control unit Multi-Trace 24 is mounted to the coil spit to minimize the impact of electrical interference;
Specially designed to capture high-frequency range of the source Geosource Sparker;
Step 6,25m channels for a more detailed velocity analysis;
Classic Design.

Controller depth towed streamer

Ensuring the maintenance of streamers at a given constant depth can improve the image quality of the geological environment and the safety of seismic data in a marine environment. However, implementation of this operation is very challenging due to the influence of ocean currents. This system is characterized by the following advantages:
Higher precision and flexibility in the positioning through the use of acoustic and exchange of sensors.
Reducing risks for safety and environmental protection at the expense of additional functions for lifting cables or manipulating the cables in order to prevent collisions with obstacles or weave cables.
Low maintenance costs.

Source array Bolt Airguns

Bolt Airguns seismic source has several key advantages over traditional air guns:

Improved security:
Air gun subarray can be extracted and lowered without the system pressure.
Reliability and repeatability of the signal:
Typically, the air gun subarray use multiple ports, resulting in venting becomes uneven. In the group with a small amount of the air gun subarray unevenly distributed air bubbles can interfere with each other, resulting in an unsynchronized signal will not repeat the form. Air gun subarray Seamap Sleeve Gun use one port at 360 degrees, which forms a spherical bubble regular shape and provides reliable repeatable signal to other air gun subarray in a group.

Sources of elastic waves: - Sparker (1 - 2.5 kJ); - Bolt Airguns 2800 XXL (V = 2h45 inch.cub) - Puls- 6A / 7C (V = L 2h0,2)

Positioning system terminal buoy seismic streamer and air gun subarray SEAMAP BoyLink
GPS Tracking System monitors the position of the streamer tail buoy and the air gun subarray. The system provides up to 32 data channels and interfaces directly with the side of the vessel in a central navigation system.
Key features:
High-strength casing: shock-resistant electronic module mounted in stainless, steel, ensures reliable operation of the air gun subarray on floats and the tail buoy;
Software Support Qinsy;
Two functions of data transmission: each module is equipped as a standard output RS-485 data and data transmission via a radio antenna;
19 "rack-mount controller.

Seismic station Geometrics CNT-2

Seismic is a basic unit for connection and control of seismic oblique GeoEel, and operates from a power supply of 60 V.

Main functions:

It provides power supply and connection to the digital modules.

It accepts a trigger signal from the controller of the seismic signal source (usually air gun subarray controller).

Optionally can send a trigger signal to actuate the air gun subarray.

It provides an interface between system management controllers depth and depth controllers themselves.

The ability to use up to 8 channels of service.

Multichannel seismic survey and seismic (in W CMP and MANSAP-CMP)

(HF CDP) Digital System (MHC AP) Digital System dT = 0.25; 0.5; 10; 2.0 ms Tzap = 100 - 10 000 ms

---

Global Navigation Satellite Systems (GNSS)

The global satellite systems of positioning, operating in the differential C-Nav mode are intended for determination of coordinates with high accuracy, practically in every point of the Earth. GNSS receivers of the most authoritative world company Trimble are used in the Caspian Engineering Company. RTK of Trimble system provides centimeter accuracy in real time and can be used in the most various offshore and onshore works

Acoustic and Seismoacoustic Profile Recorders

The Seismoacoustic source of "Bumer" type is designed for works with application of high power and has an additional benefit — change of frequency of a signal due to change of energy of a source of CSP-D. It allows to achieve increase of width of an impulse of a signal not available earlier. The increase of width of an impulse provides more big penetration with quality preservation of a single impulse.

Geotechnical Equipment

Geotechnical equipment used by geotechnical engineers to study the structure and shape of earth materials. With our equipment geotechnical engineers perform tasks, trying to determine a safe and practical solution

Drilling Rig

The rig is designed for different research works and drilling operations. It is used for core drilling and drilling of wells on water. Core drilling of high accuracy is provided by use of the fixed kinematic mechanism with a mast of wide section, complete with system of pressing/extraction by means of cylinder with effort of extraction to 100kN